|
  RESERVED AREA
Company
THE ATTENTION TO DETAILS
metodo_costruttivo

IMPELLER

ENGINE

SHAFT AND BEARING

MECHANICAL SEALS

SAFETY

COATINGS WEAR

MATERIAL

1 - THE IMPELLER
The impeller is one of the key elements of a pump, the various configurations available both for the material and for type of interaction with the liquid allow us solutions adaptable to every circumstance and to every possible use of a submersible electric pump.

Single-channel impeller:Equipped with large free passages, it ensures high performance of the submersible pump and high hydraulic efficiency.
Open impeller (Vortex): With large free passages and safe against clogging of the submersible electric pump. Versatility is his main asset, it is also suitable for pumps that have to treating liquids heavily loaded.
Open impeller: it can be combined with a hydraulic coated with wear-resistant rubber, it provides an excellent hydraulic performance, it guarantees excellent results even in the presence of fine sands and suspended abrasive particles.
The impeller with shredding unit: excellent if the conduct of the system do not allow the passage of solids of considerable size, or for any other application where suspended solids must and can be finely shredded by the submersible electric pump. The shredder is built with special hardened steel for optimum cutting performance and durability. Designed to ensure high levels of prevalence to all the pumps that mount it.

2 - ENGINE
Motor asynchronous squirrel cage. It can be in the room dry or in oil bath depending on the model of the electric submersible pump. Insulation class F. Single-phase or three-phase.

3 - SHAFT AND BEARING
Stainless steel shaft (AISI 416-420-431). Deep groove ball bearings and double row ball bearings for higher powers. Compactness, robustness and balancing dynamic type, ensure low vibration and low noise during operation: all in favor of reliability and durability of electric submersible pumps that mounts it.

4 - MECHANICAL SEALS
It can be single or double depending on the configuration. They are built with specific materials and durable, suitable for every type of application, even in the most difficult one. Make the electropumps resistant.

5 - SAFETY
(For models of electric submersible pumps that have it). Probe indicating the presence of water infiltration into the oil reservoir monitoring the operation of the mechanical seal and impeller thus preserving the engine compartment of the pump from the infiltration. The PTC thermistors in the stator windings protect the motor of the electropump from overheating due to insufficient cooling or operation in non-standard conditions of the pump.

6 - COATINGS WEAR
The wear-resistant rubber coatings and composite wear prolong the life of the electric submersible pumps, ensuring optimum performance even in particularly harsh conditions.

7 - MATERIAL
Cast iron pumps: Robustness and ease of construction make these pumps very versatile. They guarantee inexpensiveness both during the exercise stage and also during the one of maintenance of the installations in which they are employed.
Aluminium pumps: Made of aluminium alloy anti-corrosion, they guarantee easy handling and high performance.Thanks to some special wear-resistant coatings, this electric submersible pumps, can also work in particularly harsh conditions.
P.IVA 00078330255 - COPYRIGHT © 2017 - HYDROPOMPE SRL - ALL RIGHTS RESERVED
RESERVED AREA | HELP | FAQ | PRIVACY | COOKIE POLICY | CREDITS